Natural Diamond Drawing Die
It  is with excellent quality and wear resistance,is helpful in high-precision wire drawing industry and its correct hole, high-quality surface roughness and just size can maximize the surface quality of metal wire. So it is preferentially used in various fine metal wires.
Diameter range:0.01mm-1.5mm

Artificial Polycrystalline Drawing Die
It is made of imported polycrystalline blanks (Sumitomo, GE and DEBEERS) or domestic polycrystalline blanks (cobalt binder and general material) and characterized by long service life, more repair times and wide range of application.
Diameter range: 0.1mm-12.00mm

CVD Drawing Die
Its core is made of 100% diamond in furnace, without any additive and adhesive, and it is characterized by high abrasive ratio, good wear resistance , high finish and uniform abrasion. Due to its temperature resustance of up to 1000ºC-2000ºC, it is the most ideal product in hot -drawn tungsten molybdenum wires.
Diameter range: 0.06mm-2.00mm

Artificial Monocrystalline Die
It is made of diamond through processing of 111 faces. With same finidh with natural diamond, good retentivity of hole roundness and stable quality ,it is specially applicable to the processing of fine wires.
Diameter range : 0.01mm-0.70mm

Nano drawing die
Nano drawing die is forming a CVD diamond coating on the surface of tungsten carbide die. It is suitable for strand wire and the drawing of nonferrous metal like copper, aluminum etc.

Round carbide drawing die
With high-quality cemented carbide as the core , it is characterized by high wear resistance and high thermal conductivity and applicable to the drawing of various metal wire , tubings and rods.
Diameter range :0.15mm-50mm

Scalping die
It is made of imported or domestic high-quality cemented carbide through fine processing. Characterized by long service life and high quality, It is applicable to the surface scalping and processing of copper ,aluminum ,gold and other soft thick wires.

Various shaped artificial diamond dies
Its core adopts imported gomerocryst from America, Italy and Japan and domestic glomerocryst and the square , deltioid ,triangle, hexagonal ,ellipse ,semicircular and other various shaped bores are available. Characterized by uniform texture, good finish, high precision and strong wear resisitance, it is applicable to the drawing of gold & silver jewellery ,copper wires ,zipper flat wires,tooth flat wires,square CP wires, staninless steel shaped wires and other shaped wires.

Various shaped carbide dies
With high-quality cemnented carbide as the raw material , warious shapes of dies are available .It is applicable to the drawing, reducing ,scalping and extrusion of copper, aluminum , iorn , stainless steel ,aluminum alloy and other metal wires,tubings and rods as well as cold heading and heat flush of various parts. And fabrication of standard components.

Extrusion die series guide
The extrusion and guide die produced by our company is fabricated accurately according to your specification and size. We can provide natural diamond ,aftificial diamond and carbide die core and produce various shaped dies. The advanced surface treatment can effectively extend the service life of guide and extrusion die. With the optimal design of coaxiality, we reasonably make use of materials , thus reducing the costs.

Maintenance and service
We provide die chambering and polishing services of various dies to customers, including polycrystalline diamond die, natural and artificial monocrystalline diamond die, and tungsten carbide die.
Such service can remove the defect and wear of die due to drawing.
Subsequently , each die is calibrated according to the new size required by customers.

Main Technical Parameters