Published by The Maritime Executive

Published by The Maritime Executive

Published by The Maritime Executive

Published by The Maritime Executive

Published Aug 3, 2022 2:34 PM by The Maritime Executive

A French design concept using the scientific principles of suction created around a wing has received initial design approval as an auxiliary wind propulsion device for large cargo ships. Unlike other designs that are also gaining momentum in the field, the Suction Wing has no high-speed external moving parts and according to its developers provides advantages for ships.

Jointly developed by CRAIN Technologies (Centre de Recherche pour l’Architecture et l’Industrie Nautiques) and its partner REEL (Rationnel Economique Esthétique Léger), the SW270 is a solid thick wing, fitted with a rear flap. Grids located on both sides of the wing section create a suction force that draws the air stream around the wing section from the outside to the inside of the wing. The wing is mounted on a structural foundation that contains the suction fan required to operate the system.

“The suction wing concept appears to be a very promising option to help reduce greenhouse gas emissions from cargo ship operations,” said Laurent Leblanc, Senior Vice President Technical & Operations for Bureau Veritas Marine & Offshore.

BV reports it worked very closely with CRAIN from the earliest stages and recently awarded an Approval in Principle (AiP) for their Suction Wing SW270. The testing and certification group, they conducted a thorough assessment of the conceptual design, risk analysis, wind tunnel report, preliminary stability, loadings, and general arrangement. 

During the review, BV considered a suction wing with a span of approximately 88 feet. The companies explained that the design is scalable to all sizes of ships. The concept being presented (shown in the rendering above) is for a 300,000 dwt VLCC tanker that would be fitted with four wind propellers based on the suction wing concept.

“Suction Wing SW270 is an innovative wind-assisted propulsion solution that is suited for a large range of cargo ships,” explains Philippe Pallu De Barriere, CEO of CRAIN. “Developed using technologies already widely used by the naval industry, it delivers great power proportionally to its surface, and is easy to install and use on ships.”

Based on the principle of boundary layer suction, the companies said that the Suction Wing concept delivers a very high lift coefficient, which reduces the size of the device needed to achieve a given pull force. Thanks to the shape of the system, the drag remains moderate. Therefore, the lift-to-drag ratio provides a good performance in upwind conditions and for ships sailing at relatively high speeds, using the wind to propel the ship in combination with the main engine. Furthermore, the wing section can rotate around a vertical axis to adjust to wind direction and optimize performance.

CRAIN reports that studies have been carried out that so far show savings on average fuel consumption of up to 30 percent based on realistic assumptions. Operating conditions of course impact the performance but can be optimized by operating at average speed and employing weather routing.

In the next phase of the development, CRAIN says working with its partner it will pursue the industrialization of the SW270 using the definitions and regulations provided by BV.

Published Aug 19, 2022 4:10 PM by The Maritime Executive

The UK’s Royal Navy, which is already grappling with accusations of operating too many "elderly vessels” in a security environment that is becoming less stable, has begun an effort to keep its oldest frigates in service. Commissioned in 1991, HMS Argyll is the longest-serving Type 23 frigate in the fleet, and now the vessel is undergoing her second life-extension overhaul. She had been scheduled to retire in 2023. Defense contractor Babcock International has started what is being called a post-life...

Published Aug 19, 2022 3:10 PM by The Maritime Executive

The South Korean government is exploring new ways to support its shipbuilding industry and build on the slim lead they have developed in the past few months over the competition from Chinese shipbuilders. The heads of South Korea’s three major shipbuilders, Korea Shipbuilding & Offshore Engineering, Daewoo Shipbuilding & Marine Engineering, and Samsung Heavy Industries, met with Lee Chang-yang, the Minister of Trade, Industry and Energy on Friday to discuss ways they could work with the government to advance the...

Published Aug 19, 2022 1:39 PM by The Maritime Executive

More than 100 years after she went to the bottom in the “Great War,” the wreck of USS Jacob Jones, the first U.S destroyer to be sunk by enemy fire during World War I, has been located and filmed. Deployed to help fight the emerging dangers of the submarine, she would also be claimed by the menace of the new form of warfare.  A team of British divers announced this week that they had identified the wreckage. It was discovered...

Published Aug 19, 2022 12:20 PM by The Maritime Executive

The number of cases of crew abandonment continues to rise possibly due to the strains on the industry during the pandemic. While port states such as Australia have been aggressive when the cases are reported to them, the International Transport Workers’ Federation and the charitable organization Stella Maris are also reporting with the increased support of organizations and government they are making progress in winning compensation for crewmembers globally. The ITF reported 85 cases of abandonment to the International Labour...

© Copyright 2022 The Maritime Executive, LLC. All rights reserved.